Over the last few weeks we had a crisis of confidence with the engine due to the overheat in our first shakedown. As you will have seen from other blog posts regarding the engine and engine room, we had gone through a process of regaining confidence and this weekend was to be our shakedown, sea trial and last of the configuration of the new equipment including the pilot which we are really missing, one doesn’t hand steer if one can avoid it.
We decided to leave on Friday afternoon which was a little delayed by meeting new friends on one of our friendly neighbours boats. We eventually left the lock and motored down the beautiful River Orwell to our overnight destination of the mooring buoys opposite Suffolk Yacht Harbour. As we went Maria took some photos of the river…
The pick up for the mooring buoy is uneventful and we settle to our overnight resting place.
The previous night we had arrived at the tackle shop shortly after it closed but they reopened to serve us. Having recently lost some of the fishing gear through broken lines, Maria was keen to replace it and buy some bait. The advice from the shop was fantastic, apparently it is no surprise we are not catching anything, we are using the wrong stuff…. So we buy some fancy anchoring weight with twin hooks that I am sure will change our luck!
Back to our evening outside Suffolk Yacht Harbour and Maria baits the hooks with ragworms and then goes downstairs to prepare dinner. By the time she returns, she wants to check her fishing tackle. This is a regular occurrence when Maria is fishing normally followed by “something has eaten my bait” or bringing up a crab that is trying its best to eat the bait before it falls off the hook with Maria swearing at it.
She reels in to find two whiting trying to wriggle off the hook. Please note that I think Maria has very cleverly angled the rod towards the camera to give the perspective that the two fish she caught were huge, I don’t recall them being this big! I then. He led my rod and found another fish, this one had the hook in its lip and it as easy to free it and return it to the after to live another day. As night fell we discussed anchor lights, we were on a mooring buoy in a known area along a straight part of the river. The River Orwell has some documented examples of commercial traffic dragging yachts off their moorings accidentally on some of the bends in the river and some people suggest that an anchor light is appropriate. Then, one of the ocean scout vessels that come from Ipswich circled us closer and closer, we decided to help them know where we were by putting on the spreader lights! That left them in no doubt… These vessels have a bit of a reputation unfortunately and although we have never seen a problem, we decided to stay safe. They picked up a mooring buoy a few down from us and left their anchor light on! We decided that we definitely didn’t need to do so since anyone would see them and know we were there. The next morning was glorious and still. We got up early and enjoyed a hangover-cure breakfast before setting off back up river to collect Olly from Seapower to get the last few things working. We collected him off the fuel pontoon st Wolverstone and spent a happy hour driving around in circles like a family in sainsburys car park on a Saturday morning looking for a space. This helped us to configure the autopilot, check the forward facing sonar and also for further explanation of 
the fish finder “frogger” screen. She does get excited when the torpedos go across. We also discussed how happy maria was with her lights and agreed some other minor works to go with the solar power we are intending to have installed. We also remembered that the log wasn’t working, a not uncommon experience in the Marina until you free it up manually or by manoeuvring. At this stage Olly mentioned that he generally removed this before lifting to avoid any damage, and it won’t read much speed in the bilge! Olly and I addressed this, more precisely I started it and Olly finished it when I had it the wrong way round in the dark!
We then dropped Olly back and decided to go back out. One of the targets of the day was to check all of the sails and lubricate anything that needed it. This was why we were keen to do this weekend on our own so that we could get these chores out of the way without any guests. We sailed through
Felixstowe and out to the North Sea seeing some friends on our way on Tortola and on their way to the Deben. We came out into the North Sea and turned to the North to get some sail up in 8-10 knots of Easterly wind. Getting the sail up was a little problematic and we needed to lubricate, using silicon spray, the track for the main and the furlex drums for the stay sail and the Yankee. Eventually we have full sail up although Mariadz needs a little more wind than this to really get going. We decide after an hour to return to the rivers because we will anchor overnight at the anchorage in the River Stour opposite Harwich Parkeston Key. Maria’s step-mum lives in Harwich and so we decided we would drop the rib and surprise her.
We start to prepare the rib for lowering and go to lower the swim platform as our means of access. Nothing, the swim platform doesn’t move and we find that the small hydraulic fluid leak that had not been fixed (absolutely no reflection on anyone currently working on the boat), had now lost enough fluid to stop it working, grrrrh. However, we will think our way out of the problem. Mariadz being a larger Moody has quite a late freeboard, probably four feet (I haven’t measured it!), so clearly getting into a lowered rib is going to be tricky. In theory we could lower the rib, detach it, walk it around the side and board using our fender step. Still a large step but possible. But….how would we get the boat back on the davits to return home. At this stage I decided that I could be lowered, and walking down the stern like Batman, could then get into the rib, Connie, bring her round and we are ready to go. That sounds like a plan, I have even knotted a rope to help with my descent! We attach the topping lift to my life jacket and start to lower me into the boat, success! I am now in the rib, but I didn’t bring the keys with me, muppet! It’s ok, Maria will find them and pass them to me…..
Who leaves the keys to a rib in their motorhome??? Why would you want rib keys in a motorhome anyway. I don’t either but I now know that is where they are. Maria finds the spare key and also the kill cord that has come from the smaller Tamaha engine that we have. What we didn’t know is that the part of the kill chord that keeps the kill switch in the out position is a different size and will not work with our Suzuki set up. So how can we rig something to work for the kill switch? Maria comes up with a hair band and wonders whether that, bound tightly would do the job – no harm in trying and the engine starts, more importantly it keeps running, were in business! We had already checked the fuel and far from being full, there is more than enough for our little jaunt and a spare can available too.
To be fair, Maria by this stage had made no secret of her apprehensiveness about boarding the rib from the midship gate. People who know Maria will know that she will not have hidden these concerns from me and we both know whos fault it will be if anything untoward should happen. It is quite a large step. She also has a handy line to help her and gets in with no problems so I live to see another day. We are ready to go.
At this time of the evening the wind had picked up a little and was in our faces as we head off to Harwich. The tide is also coming in so we are against both wind and tide. This doesn’t lead to the most comfortable couple of miles in the rib. This is not helped by a stutter and cut out after 100m! There was enough fuel I am sure…..Maria asks if the hairband has slipped and is absolutely right. Removal and reattaching and we are ready to go. I am trying to make the journey as comfortable as possible but it is difficult in the conditions until we get quite close to Harwich halfpenny pier. We order a taxi and go to surprise Maria’s step-mum.
It must have been a surprise to see two windswept and spray covered sailors clinging to their lifejackets and waterproof bag standing at her door, but I’m sure Jean was pleased to see us and we had a nice time for a couple of hours with Jean, Maria’s sister Natalie and her dog Ginny. It is getting late and we have yet to get some food before braving the return journey which we would prefer not to do in the dark, although we are armed with a torch to help us find our way.
For food, we decided to try the Alma, where we have had a drink before but never eaten. The food was amazing, their fish, steaks and lobster are fantastic!vwe leave full and happy as the light starts to go.
Fortunately, we haven’t been out so long for the tide to have changed so the journey back is very comfortable especially as the wind had died down a little too. In the dark we are even able to reverse the procedure to get the rib back up on the davits and me returned to the deck using the topping lift. What was shocking on a beautiful warm night, with little wind was that there was no-one near us, we expected this area to be full for the first good weekend of the year and it was wonderful to have the spot to ourselves. Maria was so happy she felt the need to sing accompanied by me, I guess it was fortunate we didn’t have any neighbours.
On Sunday morning, we woke reasonably early to find the hoped for wind hadn’t materialised. Our hopes of having a great sail were dashed. A change of plan then! We will take our time and get home early afternoon. We can then spend the afternoon cleaning the outside of the boat and the rib, boy do they need it. The roast can be cooking while we do all this.
A very sedentary trip back is only broken by having to evade a yacht who tacked and then didn’t point towards the wind at all. I had adjusted our course so that when they tacked they would pass on our starboard side for some reason, they decided to cross right in front of us and we had to take avoiding action. They had the look of people who were quite prepared to hit us because they were the stand on vessel. The river isn’t very wide at this point, near the Orwell bridge, and it was annoying to have this happen. I will have to remember to not let us be put in that position again. We dealt with the evasive action quickly but it was an unnecessary stress on a gorgeous day. Still he was probably the only vessel under sail in the whole day that we didn’t photograph so his loss!
We arrived at the lock when they had the level so we could motor straight through and it was nice to see our favourite lock-keeper Clive, who has always been so friendly.

It is such a shame that he was banned from playing music, some of his choices for different boats were hilarious and it’s a shame when people like this who make things fun have to stop. He has certainly made it a pleasure when we go through the lock.
Once through the lock, we decided to find a nice berth where we could moor stern to so that we could drop the rib, clean it, clean my footprints off the stern (sorry, Mariadz) and do all of this without inconveniencing too many people by blocking a pontoon. Maria has history with cleaning the rib, she once very elegantly fell in when trying to fix the cover on the old Avon rib. That was in August when it was warm, not a feat to be repeated in May. We get everything clean, especially me – note to self, don’t trust Maria with a hose pipe, you WILL get very wet. We finally returned to our home berth to finish off the clean. At the end of it Mariadz looked great and we felt we had done something for her after she does so much for us.
Then a gorgeous Sunday roast in the
cockpit for two exhausted sailors.
Somewhat unusually for the UK, we had a hot and sunny weekend and then it rained for the next few days. However, much more expected was, despite using a little sun lotion, both Maria and I had sun burn after Sunday!
So the Seapower marine double-act have continued to give the engine room some much needed TLC. It was impossible to see anything in the engine room, no matter what time of day, without additional lighting. We agreed that if we really want to know what is going on we will need some LED lights to brighten the area and show up the dark and sinister secrets.
the engine has also been run for approximately 10 hours with no overheat issues which has been reassuring. With a clean engine room floor, we would also be able to see if anything was coming out of the engine and so far we seem to be in a good place. It now means that Maria is confident again
since it had 2.5 engine hours when we bought her and was spotless. It was easy to keep this clean.
Maria wanted to get some new ones. When I explained how much the last set cost, she decided to do a little more research and see what she could get. Having done some research Maria wanted to try polyester fender covers to see if they wore better. They were certainly a lot cheaper. 🙂

Within a week we have the new filter lid. We decide we have probably exhausted our knowledge and should wait for the expert.
We also want to get the engine serviced and as you can see from the picture, the lighting in there is terrible so we would like to do that too. As you will have seen from previously, it has been a while since we spent thousands on the engine….so we must be due again 😦 the good news is though that once done the engine room will be immaculate and like our engine room on the Dufour. This will help us in the future and also the experience of working on the engine will help us when we go on our long journey.

We looked at a number of options over a long period of time. Removing the poor veneer on the table showed more fire damage and the original wood was blackened from fire. We had success previously with the walls of the saloon being re-veneered and so we tried that, although the main part of the table was fine, there was a problem where the veneer got to the edges where the fiddle (grab rail on the edge of the table) was. We looked at whether we could put a fill in the corner so that the edge of the veneer would not show but everything we tried couldn’t deal with the very tight curves on the corners of the table.
This unfortunately meant that Maria wanted something that wouldn’t look out of place on one of these. We spoke to a few people and Kevin was recommended to us. Kevin discussed options and he agreed that he could do something special with the existing workings of the table that would be a centre point of the saloon and would give Maria the table that she really wanted. Kevin spent a lot of time on the table and designed it with two compass roses when the table is extended with the fold out insert in place. When the table is smaller it has a single compass rose. Kevin quoted for the work and we were happy. We subsequently found out that he is a bit of a perfectionist, hence why Maria likes him so much 🙂 and he took the time to do a really good job even though it coincided with the birth of his child. He cant thank him enough. While the job was being done, Kevin had left us with a plywood top to our table base so that we could still use it while the work was being done. In March, the work was complete and despite having to delay the install for a week because we were away, the install was ready to happen on the 19th March. Kevin had offered to send photos through but Maria was unequivocal in her desire to see the table for the first time when it was in place.
We are really, really pleased with the results. 
deserves a special mention for being so amazingly helpful and kind to us over a number of years. He is one of the leading estate agents and works at
with a bathroom, seating area with fireplace, dressing room as well as the bedroom itself. This is the last part of the build to be started and the stones that comprise the round houses has been delivered and the work will start as soon as the weather improves enough. To the rear of the trulli is a private ‘English Country’ garden with a grassed area. This will be our little homage to our home country with all other aspects being from our adopted home.
Moving round to the front of the house, there is a large entrance area with seating which is flanked by the kitchen and study/additional bedroom. This part of the build are all lamia with curved ceilings. In front is the lounge area with a small games room to the left, with our pool table from the UK! Between the kitchen and dining room is a staircase down to a small basement which will have a storage area and some gym equipment, useful for people who can’t resist the pasta but still want to get into their clothes at the end of the holiday!
From the entrance to the right is the corridor that leads to the remaining bedrooms, study, main bathroom and garage. The two bedrooms that face the rear of the property have star ceiling designs, as well as their own private seating area under shade.
not for diving. Finally there is a jacuzzi within the pool which maybe a good spot to watch the games for those less energetic.
This area can be used as another private sunbathing area although some of the roof is sectioned off for the solar panels that help to provide the power for the house. The roof also offers stunning views of the surrounding countryside with the entire area covered with Olive trees and a few small houses dotted around. One of these is the piccolo casa. A self contained one bedroom apartment on the other side of the driveway.

The upgrade was to use the toilet version of this pump. This is equivalent to the more powerful of the two grey water pumps but has a much wider pipe, let’s not linger on why that is required for a toilet pump…..
(the ones that disguise screws and make them look like the headlining or woodwork. These had jammed across the pipe together, which was little wider than these at the bend. This stopped all flow, especially as they had been packed in with hair and assorted other gunk. On cleaning this out we put the whole system back together and tested.
gets you one of these stainless steel little puppies that fits the plug hole perfectly, has a very fine mesh that catches rice grains etc and looks like it is standard fit. So all those problems could have been averted for less than two pounds….
of course throws the compass off 😦 . we looked at the design of the standard steering column and were a little confused. Engine hours is important to keep an eye on but does this really need to be on the helm? We decided to move it down below. There were also some redundant switches. By carefully rearranging the steering column, with Olly from Seapower’s help, we were able to come up with a better design that also fitted in the chartplotter and the control panel for the Forward Facing Sonar. The radio bracket has been moved
away from the compass and the new remote control for the autopilot has also been mounted on the pedestal. Another change was removing the standard key to start and replacing with two buttons. At the end of the day the keys are all standard and so add no security but can handily (?) break off in the ignition at times. We just need to make sure that the ignition is switched off from the master control down below to avoid someone taking Mariadz away. Finally we added LED lights to light up the table when needed.
